Formulated to enrich the colour of worn, faded or damaged stone

Penetrating and breathable sealer which enhances the colour of natural stone, pavers, tiles, concrete and grout

Suitable for indoor and outdoor use

Repels stains and soiling for easier cleaning

Rockstar Stone Enhancer is a penetrating and breathable sealer, formulated to enhances the colour of natural stone, pavers, tiles, concrete and grout. Suitable for indoor and outdoor use, Rockstar Stone Enhancer repels stains and soiling for easier cleaning.

Physical Properties

Colorless to slightly turbid
Mild Petroleum
PH n/a
Specific Gravity 0.81g/ml

Application

Ensure the surface is free from grease, dirt and that any prior coatings have been removed. It is important that the surface is dry. Before you commence sealing make sure that you test Rockstar Stone Enhancer in a small area, wait 24 hours cure time to determine the ease of application and the desired results.

Apply Rockstar Stone Enhancer with a lamb’s wool applicator, low pressure hand sprayer or a paint roller. A minimum of two coats of Rockstar Stone Enhancer should be applied to the surface. Allow 30 minutes for the product to penetrate the surface then wipe with a clean white dry cloth to remove excess. The initial coat coverage rate will vary between 15m²/lt (161ft²/qt). and 25m²/lt (269ft²/qt). depending on the porosity of the material. Subsequent coats will attain a coverage rate up to 30sqm.

There will be a drying time of around 60 minutes between coats depending on weather and humidity. The surface should be allowed 24 hours to fully cure and develop weather resistance. For Rockstar Stone Enhancer to perform the surface will require regular care and maintenance.

Technical Information

For Technical information regarding this product contact Rockstar

First Aid

If poisoning occurs, contact a doctor or the Poisons Information Centre +61 13 11 26. If swallowed, DO NOT induce vomiting.