Stone Shield
Download the MSD sheet for this product

	Solvent based acrylic sealer
	Provides excellent gloss retention, wear resistance and anti-slip properties
	Suits terrazzo, ceramic, slate, marble, granite, sandstone and concrete
	Physical Properties Opaque Strong citrus PH n/a Specific gravity 0.87
	Rockstar Stone Shield penetrates and deep seals like a solvent-based sealer without the obnoxious solvent odours. Providing excellent gloss retention, superb wear resistance and excellent anti-slip properties. Rockstar Stone Shield penetrates and protects terrazzo, marble, ceramic tiles, terracotta, concrete, bricks and vitreous surfaces.
	Application
	For best results the surface should always be pre-sealed with Rockstar All Stone Pre-Seal before the surface is cleaned and sealed. Ensure the surface is free from grease and dirt and that any prior coatings have been removed. For heavily soiled floors it is recommended that a combination of Rockstar Heavy Duty Degreaser (HDD) and Rockstar Neutral Clean are used. Once the floor is free from contamination and dry, the sealing process can start. Always test product on a small area first. And allow a 24-hour cure time to determine the ease of application and desired results. A thick coat of Rockstar Stone Shield should be applied with a lambs wool applicator (for best results apply sealer with an airless spray gun). On dense stone surfaces leave for a minimum of 12 hours between coats. For concrete and other porous surfaces allow 2 to 3 hours between coats. The initial coat coverage rate will vary between 20m2/lt (215ft2/qt) and 40m2/lt (430ft2/qt) depending on the porosity of the material. Subsequent coats will attain a coverage rate of up to 20m2/lt (215ft2/qt). The surface should be allowed 24 hours to fully cure and develop weather resistance.
	For Technical information regarding this product contact the Rockstar
	To view disclaimer,click here