Shop

Stone Enhancer

$71.60$844.80 ex GST

Rockstar Stone Enhancer is a penetrating sealer used to enrich the colour of worn, faded or damaged stone. Rockstar Stone Enhancer is very popular in the polished concrete community and used frequently by customers who wish to enhance their basalt/bluestone tiles.

Developed to enrich the colour of worn, faded or damaged stone, this is a penetrating and breathable sealer that is suitable for indoor and outdoor use. Repels stains and soiling for easier cleaning.

 UN1300

Clear
SKU: N/A Categories: ,

Description

Rockstar STONE ENHANCER is a sealer that darkens and brings out the natural beauty of stone. Ideal for enriching the colour of worn, faded or damaged stone.

Rockstar STONE ENHANCER is a penetrating and breathable sealer which is suitable for use indoors and outdoors.

USES

Rockstar STONE ENHANCER is used to darken and enhance the colour of stone and tile surfaces.

New formula now boasts superior protection against oil and waterbased contaminants

Can be used on Natural Stone, Terrazzo, Concrete Pavers and Porcelain Tiles.

Suitable for indoor and outdoor use.

BENEFITS

  • Long lasting and weather-resistant
  • Can even out colour inconsistences
  • The surface becomes highly resistant to oil and waterbased contaminants
  • UV Stable

PROPERTIES

Appearance and colour………………………………… Colourless to yellowish, clear to hazy liquid
Specific Gravity (Water = 1)…………………………… 0.85 g/ml
Boiling Point …………………………………………….. 120 – 200oC
Solubility in Water……………………………………….. Not miscible
Flash Point…………………………………………………. 31oC

APPLICATION INSTRUCTIONS

  1. A test sample before applying is highly recommended
  2. Ensure the surface to be sealed is free of excess grout and grout haze, is dry and free of any oils and other surface
  3. Apply STONE ENHANCER using a lambswool Ensure that the surface is fully saturated without leaving pools of sealer. Remove excess sealer on the surface with a clean dry cloth. Rub the product into the stone
  4. Apply 2 more coats. Ensure you rub sealer into stone. Leave no residue on the surface. More coats maybe required
  5. The product will dry in 6-8 hours, full cure develops after 7 days.

COVERAGE

Coverage is dependent on the permeability of the stone or tile and is in the range of 6-15 Mt2 per Litre / 50 -150 ft2 per Quart.

PRECAUTIONS

  1. Do not allow pools of liquid STONE ENHANCER to dry on the
  2. Avoid contact with skin and eyes by wearing suitable protective gloves

CLEANING

Clean all equipment with mineral turpentine.

PACKAGING

STONE ENHANCER is available in 1, 5 and 20 Litre Containers / 1 Quart / 1.32Gal / 5Gal.

STORAGE

Keep container tightly closed when not in use. Store in a cool, dry place out of reach of children.

Keep away from sources of heat, spark and ignition, product is flammable.

DISCLAIMER

The advice and information contained herein is based on our best knowledge of the product. We believe the information to be accurate and reliable as at the date supplied, but no representation, guarantee or warranty, expressed or implied, is made to the accuracy, reliability, or completeness of the advice and information. We urge persons receiving this advice and information to make their own determination as to the advice and information’s suitability and completeness for their own particular situation. When in doubt it is always prudent to perform a trial on a scrap section of material, or inconspicuous section of the job to ascertain the products suitability.

Additional information

AUS Size

1L, 5L, 20L

US Size

1 Quart, 1.32Gal, 5Gal

Technical Data Sheets

Please access the product information sheet and Material Safety Data Sheet (MSDS) below:

Stone Enhancer_Safety Data Sheet

Stone Enhancer_Technical Data Sheet