Rockstar Anti-Graffiti is an easy to apply penetrating sealer, that wont change the surface appearance, while providing superior protection against graffiti.
Graffiti is removed using high pressure hot water. After removal re-apply Rockstar Anti-Graffiti to the affected area to maintain superior surface protection.

Colourless liquid
Odour ethereal
Specific gravity 0.82 g/ml

For Best Results ensure the surface is free from any grease and dirt and that any existing coatings are removed. We recommend the floor should be cleaned using Rockstar Neutral Cleaner, or for more stubborn stains scrub the floor using Rockstar Stone Clean Plus prior to applying Rockstar Anti-Graffiti.

Always test the product on a small area or sample piece of material first. Allow a 24hr cure time to determine the ease of application and desired results.

Apply three coats or Rockstar Anti-Graffiti using a low pressure spray or lambs wool applicator. Remove excess using a clean white cloth or a clean dry lamb’s wool applicator. Each coat will obtain a coverage rate between 5 and 15m2/Lt depending on the porosity of the material. There will be a drying time of around 60 minutes between coats depending on weather and humidity.