Easy Seal
Download the MSD sheet for this product

	Penetrating Sealer for limestone, marble, travertine, sandstone and concrete pavers
	Provides protection against water and oil based contaminants
	Easy to apply
	Physical Properties
	Colourless to yellowish, clear to hazy Odour hydrocarbon pH not specified Specific gravity 0.81 g/ml
	Rockstar Easy Seal is a solvent based sealer which is designed to penetrate limestone, marble, travertine, sandstone and concrete pavers, sealing the pores yet leaving the stone with a natural finish. Once cured it will protect the stone from water and salt damage as well as provide stain resistance.
	Application
	For Best Results ensure the surface is free from any grease and dirt and that any existing coatings are removed. We recommend the floor should be cleaned using Rockstar Neutral Cleaner, or for more stubborn stains scrub the floor using Rockstar Stone Clean Plus prior to applying Rockstar Easy Seal. Always test the product on a small area or sample piece of material first. Allow a 24hr cure time to determine the ease of application and desired results. Apply two coats or Rockstar Easy Seal using a low pressure spray or lambs wool applicator. Remove excess using a clean white cloth or a clean dry lamb’s wool applicator. Each coat will obtain a coverage rate between 5 and 15m2/Lt depending on the porosity of the material. There will be a drying time of around 60 minuets between coats depending on weather and humidity.
	For Technical information regarding this product contact Rockstar
	To view disclaimer,click here