Contreat Cream
Download the MSD sheet for this product

	Penetrates in to dense concrete forming a UV, alkali stable and durable hydrophobic zone within surface
	Water based cream containing 80% active silane, clings to overhead and vertical surfaces, avoiding run off of product
	Surface appearance and vapour permeability of concrete remain unchanged
	Physical Properties
	White to yellowish Paste Slight odour pH Not specified Specific gravity approx 0.9 g/ml
	Rockstar Contreat Cream is a unique impregnating agent because it is thixotropic. It has an outstanding ability to impregnate high-quality concrete and reinforced concrete, and protects against the onset of concrete cancer.
	Application
	For Best Results ensure the surface is free from any grease and dirt and that any existing coatings are removed. We recommend that new concrete surfaces should be cleaned with a brush or compressed are to remove any large dust particles. If the surface is heavily soiled, clean using superheated steam. Always test the product on a small area or sample piece of material first. Allow a 24hr cure time to determine the ease of application and desired results. Apply one even coat of Rockstar Contreat Cream using a low pressure sprayer. Up to 300g /m2 may be applied in one operation to vertical surfaces and roofs. The exact amount depends on the absorbency of the substrate. A second coat of Rockstar Contreat Cream may be applied at any time but is usually unnecessary.
	For Technical information regarding this product contact Rockstar
	To view disclaimer,click here