Concrete Paver Pre-Seal
Download the MSD sheet for this product
 

	Specifically formulated for concrete pavers to provide water repellency to assist in grouting and clean up
	Reduces salt transmission, efflorescence, mildew, grout haze
	Durable, fast curing, and non flammable
	Suits concrete pavers and pre-cast stone products
	Physical properties Milky White Ph 7-8 Specific Gravity 1 Odourless Rockstar Concrete Paver Pre-Seal is a water based sealer specifically formulated for Concrete Pavers and Precast Products to stop water absorption during the cleaning process. Once sealed it will reduce salt transmissions, efflorescence, mildew, and grout haze. Suitable on all earthen materials and can be used in domestic, commercial, or light industrial applications. Rockstar Concrete Paver Pre-Seal is a durable and non flammable sealing solution.
	Application
	Sweep area to remove dust, building debris i.e plaster, paint or any contaminant that will inhibit maximum penetration of the sealer. Once removed the sealing process can start. Always test product on a small area first. And allow a 24-hour cure time to determine the ease of application and desired results. One coat of Rockstar Concrete Pre-Seal should be applied with a low pressure pump or a lambs wool applicator. Allow 10 minutes for product to penetrate surface then wipe off excess with a clean white dry cloth. Important do not allow pre-seal to pool on surface. The coat coverage rate will vary between 5m2/lt (54ft2/qt) and 15m2/lt (161ft2/qt) depending on the porosity of the material. Allow drying time of around 60 minutes between coats depending on weather and humidity. The surface should be allowed 24 hours to fully cure.
	For Technical information regarding this product contact Rockstar
	To view disclaimer,click here